Post - Articles

DOE supports sCO2 pilot power plant project

  • 7 years ago (2016-10-18)
  • David Flin
Africa 306 Asia 860 Australasia 51 Biomass 8 Climate change 20 Coal 282 Cogeneration 1 Concentrating solar 5 Cyber security 8 Decarbonisation 1 Decentralised energy 5 Demand side management 2 Demand side response 2 Digitalisation 10 Distributed energy 10 Distribution 113 Electric vehicles EVs 4 Emissions 61 Energy management 1 Equipment 2 Europe 1069 Gas 379 Gas engine plant 62 Gas fuel 2 Horizon 2 Hydroelectric 17 Hydrogen 56 Hydropower 116 Latin America 77 Maintenance 3 Marine 1 Metering 2 microgrid 5 Middle East 317 North America 1004 Nuclear 643 Offshore wind 119 Oil 18 Operations 4 Policy 8 Regulations 3 Renewables 758 smart grid 2 Solar 250 Storage 41 substation 8 Tepco 2 Tidal 2 Toshiba 4 Transmission 181 US Senate Washington 4 Wind 241
The US Department of Energy’s (DOE) National Energy Technology Laboratory (NETL) has selected Gas Technology Institute (GTI), Southwest Research Institute (SwRI), and GE Global Research for an $80 million award to design, build, and operate a 10 MW supercritical CO2 pilot power plant. The goal of the project is to advance the technology development of sCO2 Brayton power cycles.
European Photovoltaic Solar Energy Conference and Exhibition (EU PVSEC) 2024
More info

European Photovoltaic Solar Energy Conference and Exhibition (EU PVSEC) 2024



The partnership will design, construct, commission, and operate a 10 MW sCO2 pilot plant test facility located at SwRI’s San Antonio, Texas, USA campus and tie into the power grid. The project will operate at a turbine inlet temperature of at least 700°C aimed at advancing the state-of-the-art high-temperature sCO2 power cycle performance from proof of concept to validated prototype operational system.

GTI will lead the six-year project and provide system engineering and test management. GE Global Research will be responsible for turbomachinery design and fabrication. In addition to hosting the pilot plant, SwRI will be responsible for the design of the test facility, implementation, and operation, as well as turbomachinery evaluation. Additional project support will be provided by OEMs, international research and development organisations, universities, and power system utilities.